Best way to install linux on usb with persistent storage

#Best way to install linux on usb with persistent storage install
#Best way to install linux on usb with persistent storage portable

Notes: You will need to make your selection in step 10 quickly or the system will boot without using the Knoppix persistent overlay image. Insert usb stick into usb slot (insert tab-A in slot-B). All you need is a computer that can boot from its own optical drive AND can also boot from a usb stick. Now you can optionally recall your stored settings from the USB and merge those saved settings during boot. Mint installs easily to a usb stick with persistent settings. Select OK and the USB flash thumb drive will now be used for the home directory of the Knoppix user.On reboot a Knoppix configuration menu should pop up stating that it has found a home directory on your device.You must reboot for the change to take effect.It should automatically find the persistent image at boot, but, make a note of what it says, then click OK. The system will now inform you of what to type at the boot prompt to use the persistent Knoppix home directory on your flash drive.If the drive has an activity light, you will see it flashing. Wait while the system prepares the flash drive.Enter the size in megabytes you would like your home directory to be.You will be asked if you want to encrypt the file that will be created on the flash drive.Choose the partition that corresponds to your вЂњUSB flash driveвЂќ.Click Yes in the box that pops up to proceed!.From the Menu, select Configure-> Create a persistent Knoppix disk image Click the penguin located in the panel at the bottom of your screen.How to Create a USB Knoppix Persistent Overlay Image.

#Best way to install linux on usb with persistent storage install

If you don't fancy this, I don't see any reason why you couldn't instead make a persistent install to an external HDD but as such installs are optimised for flash it might not be optimal.Creating a Knoppix Persistent home directory This article gives more info about the issue and describes one way achieve this without disconnecting. on a desktop) is to disconnect any internal drives before booting the installer but that's not always possible. The simplest way if hardware access is easy (e.g.

#Best way to install linux on usb with persistent storage portable

Important bit: However, for a portable normal install to work (and to prevent the original device needing the external drive attached whenever you boot it) you need to make sure the installer does *not* install the boot loader to the internal drive of the device you're installing with. I suggested the USB stick format SSDs because they're more portable and don't need a cable, but small format HDDs are pretty portable too, Rufus 3.7 beta, released yesterday, has finalized the persistent partition support for Debian and Ubuntu, allowing users to create persistent storage live USBs of recent Debian Live ISOs, and Ubuntu Live ISOs created after 1st of August, 2019. The installer will install to any connected drive, portable HDD is fine. Rufus: Creating A Persistent Storage Live USB With Ubuntu Or Debian From Windows. It doesn't mention it, but I think the persistent installs are intended to help extend the poor write-life of ordinary flash drives, but that's not a real concern with proper SSD type flash drives. This article explains some of the differences. If you do get one of these, you can just treat it as a normal disk and do a normal install instead of a persistent install. Obviously they are noticeably more expensive and bulkier, but they will not only last much longer, but also give much better performance (although you may be speed limited if you don't have a USB 3.2 port). Note that the manufacturers don't always make it clear if a USB stick has an SSD-type controller, SanDisk just call them 'Extreme Pro' and don't even mention the controller, on Amazon or their site (as far as I can see). This article explains a bit, and reviews some examples. If it's more than a short term solution you could consider an external SSD you can get proper external SSDs in the USB stick format, and they have proper disk controllers and will last much longer. Ordinary USB stick flash drives typically won't last very long used like this (no proper wear levelling disk controller so writes will wear out the drive quickly).